Realistic Dinosaur Costume Manual

Ultimate guide on how to use our new realistic dinosaur costume step by step

Any problem with how to install, how to operate the costume?

No worries, we will walk you through on this page.

1. Unboxing

Step 1: Prepare a pistol drill and remove the screws on the crate.

Step 2: Take off the wood and steel pipe.

Step 3: Take out the support frame and assemble it.

Step 4: Take out the costume and hang it on the support frame.

Step 5: Remove the bubble wrap and take out the paint inside the legs.

Step 6: Install the tail.

Step 7: Check out the accessories.

Here is the list: ①: Zipper, ②: Chain, ③: Collar, ④: Paint, ⑤: Fabric, ⑥: USB Cable, ⑦: Brake Cable, ⑧: Foam, ⑨: Velcro, ⑩: Charger, ⑪: Power Adapter, ⑫: Teeth.

Step 8: Attach the collar onto the costume.

Step 9: Connect the chain onto the collar.

2. How to Clean the Skin

After the painting completes, the skin looks “bright”, which is not realistic. Thus we put some “Chalk Powder” to make it look matt.

When you receive the costume, please follow the steps below to get it clean.

Step 1: Prepare a piece of foam or towel.

Step 2: Get it wet with clean water.

Step 3: Wipe up the costume.

3. How to Install the Support

Step 1: Turn the stand upside down and install the cross.

Step 2-3: Install the support.

Step 4: Straighten the bracket.

4. How to Install the Tail

Step 1: Put the tail frame onto the body.

Step 2: Align the nut of the tail frame with the mounting hole.

Step 3: Tighten the screws.

5. How to Put on the Costume

Step 1: Get into the costume.

Step 2: Fasten the leg straps (you may need someone to help you).

Step 3: Zip up the legs, and fasten the snap buttons on the legs.

6. Check the Electrical Devices

Recommended Battery Specifications: 12V acid/lithium battery.

Ideally, 12V 16Ah lithium battery.

Notice: Don’t forget to buy the charger and make sure the battery you buy fit the container size.

Connect the battery to the costume before you check the electronics.

  • Power Button
  • Power Cable
  • VGA Cable
  • New Controlling Box
  • Handles: trigger eyes & mouth movement
  • Battery Display
  • VGA Cable
  • Camera: view outside
  • Buttons: trigger and switch the sounds
  • Monitor: view outside
  • Start Button: turn on the monitor
  • Rotation Button
  • Video Switch Button: If the screen turns black or blue, try this

7. How to Tighten Your Shoe (Only for Visible Legs Costume)

Step 1: Place the strap as shown in the picture above.

Step 2: Place your foot on strap.

Step 3: Puts the strap under the position shown in A and B.

Step 4: Tighten the strap.

Step 5: Thread the strap into the frame.

Step 6: Tighten the strap.

Step 7: Thread the strap through the buckle.

Step 8: Tighten the strap.

8. How to Put on the Harness

Step 1: Put on the harness.

Step 2: Buckle the safety buckle on the waist.

Step 3: Buckle the safety buckles on the chest.

9. How to Operate

Step 1: Remove the support rod from the handle.

Below are the Left handles and buttons functions.

  • Left Button 1: Trigger eyes sounds
  • Left Button 2: Switch eyes sounds
  • Left Handle 3: Operate eyes movements

Below are the Right handles and buttons functions.

  • Right Button 4: Trigger eyes sounds
  • Right Button 5: Switch eyes sounds
  • Right Handle 6: Operate eyes movements

10. How to Charge

Step 1: Remove the control box power cable.

Step 2: Connect the charge with the battery.

Step 3: Connect the charge to the socket.

11. How to Store

Step 1: Remove the tail from the costume.

Step 2: Take the costume off the support.

Step 3: Put the costume into the crate. 

12. How to Change the Sound Files

Step 1: Prepare a laptop or a smart phone.

Step 2: Connect the WiFi with the
controlling box.

Step 3: Type 192.168.4.1 in browser.

Step 4: Click “English” to enter modifier page.

Step 5: Click “Auto File” to change sound files.

Step 6: Delete current sound files and upload new sound files.

13. How to Replace the Brake Cable & Handlebar

The following video shows how to replace the mouth / eyes cable.

This video shows how to replace the spare brake cable.

Required tools: 10mm Spanner, 12mm Spanner, and Nipper Plier.

Step 1: Use the 12mm spanner to loosen the screw of the brake cable on the handlebar.

Step 2: Take the brake cable out of the handle (find someone to open the mouth BIG).

Step 3: Use the 10mm spanner to loosen the screw of the brake cable on the top of the costume framework.

Step 4: Remove the head of the brake cable (also requires another guy to open the mouth BIG).

Step 5: Remove the head pin of the brake cable, you can take off the entire brake cable. Then replace a new one.

14. How to retouch the color

Step 1: Acrylic paint & ethyl alcohol, water ladle, and drawing brush are quired.

Step 2: mix the right color you need.

Step 3: Prepare a piece of foam, and dip the foam in a little paint to wipe on the faded area.

Finally, put the costume in a ventilated place to dry for 3 hours.

15. How to Maintain

Step 1: Squeeze the silicone onto the button of the feet.

Step 2: Use the foam to spread the silicone evenly.

Spray the De-rust lubricating spray on every joint or rust area monthly.

Still Looking for More Answers? Only Dinosaurs Can Help!